Electric Water Pump for Shower

A shower pump is a simple device installed within your shower system to help increase water pressure and boost both hot and cold water. This provides an increased water flow to your shower, resulting in an overall more satisfying shower experience. When it comes to tap water supply, this electric water pump for shower can ensure a steady and reliable flow of water to faucets throughout the house. It can handle the water pressure requirements of multiple fixtures simultaneously, ensuring a consistent water supply for daily activities.

• For showers, the electric circulating water pump helps to maintain a steady water pressure, allowing for a comfortable and enjoyable shower experience. It ensures that water flow remains consistent, even with fluctuations in water pressure.

• When it comes to water heaters, this pump provides efficient circulation of water, ensuring that hot water is readily available when needed. It helps to minimize waiting time for hot water and improves overall energy efficiency by reducing heat loss in the piping system.

How Does an Electric Shower Pump Work?

All shower pumps operate on the same principle and have the same key components. They consist of a box containing a motor and one or two internal impellers (another term for the pump), with water inlets (connected to the water supply) and outlets (connected to the shower). When the shower is switched on, water is fed into the inlet and passes through the impeller, which spins quickly and propels it out of the outlet hose. From there, it travels through the shower unit and reaches the shower head.

For the water to move against gravity, water pressure is necessary. The amount of pressure gained (measured in bars) depends on several factors, such as the distance the water needs to travel and the power of the pump and shower.

Types of Electric Water Pump For Shower Available

Single Impeller Shower Pumps
A single impeller shower pump has one impeller, which can only pump one water feed: hot, cold, or a mixed feed. In most cases, they are used to pump hot water to a mixer shower that already has a cold mains supply. However, they can also be used to pump cold water to an electric shower (which doesn't require a hot water supply). Alternatively, two single impeller pumps can be used to pump hot and cold water (one pump for each feed) if the pumps need to be installed in different locations.

Twin Impeller Shower Pumps
A twin impeller shower pump has two impellers that pump both hot and cold water feeds to the shower simultaneously to achieve an equal flow. These shower pumps are most effective for manual and thermostatic mixer showers. Boosting the water pressure for both supplies makes the shower more powerful than a single impeller pump, and they allow for greater control over the temperature. The most powerful twin impeller pumps can be used to boost the water pressure of several showers at once or can be used to power multiple appliances – a shower and a bath, for example.

Positive Head Shower Pump
A positive head shower pump relies on gravity to feed cold water from the storage tank to the pump, kick-starting the impellers into action. For a positive head shower pump to work, the top of the shower head must sit at least 600mm below the cold water tank. These are the most common type of shower pumps and are typically used in homes where the cold water storage tank is in the loft, and the shower is in a room below.

Negative Head Shower Pump
Unlike a positive head shower pump, a negative head shower pump doesn't rely on gravity. So, how do negative head shower pumps work? They work by sucking water from the tank into the pump to kick-start the impellers. Negative head shower pumps are used in homes where the cold water tank is either level with or below the top of the shower head, for example, in a flat or loft conversion. However, they can also be used in homes with a positive head shower installation where the natural water flow is less than 2L per minute.

Q: Can you accept customization?
A: Of course.
For custom kraft boxes, the minimum order quantity (MOQ) is 100 pieces.
For custom colored boxes, the MOQ is 1000 pieces.

Q: Can we use our own logo?
A: Yes, of course, but the MOQ is 100 pieces.

Q: What is your packaging like?
A: Most items are packaged in carton boxes, while some are packaged in wooden boxes.

Hot Tags: electric water pump for shower, China electric water pump for shower manufacturers, suppliers, factory, Circulating Pump, Electric Pump for Shower, Electric Water Pump for Shower, Inline Circulation Pumps