In areas where the external temperature is too low, water pipes need to be buried about 10cm below the freezing line. It is strictly forbidden to expose the pipeline to the air to prevent the water pipe from freezing and cracking; when the pump is finished, try to drain the water stored in the pipeline as soon as possible. There are two ways to complete the drainage function:
1) Install manual valve. Arrange operation and maintenance personnel to regularly turn the valve to drain water.
2) Install the pressure relief valve. Set the pressure of the water pipe. When the pressure is greater than the set value, the pressure relief valve will be automatically opened to drain water.
3) Drill holes in the non-cold east area of the pipeline. When the system is shut down, excess water in the pipeline can be discharged back through the small hole; pay attention to the opening direction of the small hole on the downstream side of the one-way valve.
Antifreezing Of Water Pipes For Solar Water Pumps
Aug 08, 2023
Leave a message






